“Moog Synthesizer 3P
Serial #1 of only 40 worldwide!
-Entire system recreated using original documentation, circuit board and art files and traditional manufacturing techniques
-37 hand-stuffed, hand-soldered modules custom mounted and hand-wired in three solid wood, tolex-wrapped cabinets
-10x discrete 901 series oscillators (Coveted for their organic sound – not found in the Model 15, System 35 or System 55)
-905 Spring Reverb module (Expands the character of any sound into enchanting, piano-like trails – not found in the Model 15, System 35 or System 55)
-4x CP3 mixers (These are tonally similar to the mixer found in the Model 15 – not found in the Model 15, System 35 or System 55)
-984 4-channel Matrix Mixer (Designed for parallel processing, complete with dedicated controls for Bass and Treble – not found in the Model 15, System 35 or System 55)
-100% discrete design (There are absolutely no op-amps – not the case in the Model 15, System 35 or System 55)
Only 40 handcrafted and sold worldwide
MODULES:
1x 901 Voltage Controlled Oscillator
3x 901A Oscillator Controllers
9x 901B Oscillators
3x 902 Voltage Controlled Amplifiers
1x 903A Random Signal Generator
1x 904A Voltage Controlled Lowpass Filter
1x 904B Voltage Controlled Highpass Filter
1x 904C Filter Coupler
1x 905 Reverberation Unit
3x 911 Envelope Generators
1x 911A Dual Trigger Delay
1x 912 Envelope Follower
1x 914 Extended Range Fixed Filter Bank
1x 984 Four Channel Mixer
1x 991 Lowpass and Highpass Filter with Attenuator
1x 992 Control Voltage/Attenuator Panel
1x 993 Trigger & Envelope Voltages Panel
1x 994 Multiples Panel
4x Console Panel No. 3, each including: 4-input mixer with + and – outputs, 2 Trunklines, Control Voltage Switches, Master Volume, and Click Filter
1x Console Panel No. 1 including: 3 Control Voltage and Trigger Outputs
1x Console Panel No. 9 including: Power Switch, Pilot Lamp, Fuse Holders
1x 350 Watt 120 VAC or 230 VAC Switch Selectable Power Supply
Includes original boxes and packaging
Includes 2 multi-pin connector cables, and 1 IEC cable
Includes original COA and module checklist
Does NOT include patch cables
Condition:
This unit has been tested and is fully functional. It has been well cared for and stored in its original boxes. It has only been used a few times. There are a few areas on the exterior tolex that have a few light scuffs from being moved around, but nothing major. Please note, there are NO patch cables included. Please see photos for the exact unit being sold. ” Click here to visit listing on eBay