Elektron Monomachine

“Elektron Monomachine SFX-60 MKII
Zero Sonic Issues
Includes Original Power Adapter

As with a few of these, there is a small piece of dust below the screen (See Picture #9), it is basically invisible when in use (See picture #8). Unit has been factory reset, but I went ahead and erased all of the Elektron factory kits and replaced them with the sought-after Autechre Kits & Patterns from their Quaristice era live shows. I feel this is beneficial, as it shows the full power of this machine and with a little digging into the patterns and kit setup, you can see a few tips and tricks from the pros. If factory kits are your thing, you can easily do a factory reset via the startup menu restoring the generic kits/patterns.

Please note: The headphone output jack does not work. The previous owner must have tightened the nut too much and being that these old Elektron boxes used plastic jacks, the jack broke. If you feel the need to fix this, it is a $6 part and three solder-joints. Otherwise, you can do like everyone else and run the L & R main outs to your board or DAW. However, If you feel the need to use headphones, you can grab a Hosa YMP-434 3.5 mm TRSF to Dual 1/4″ TS Stereo Breakout Cable for $5.50 from Amazon and turn those L&R main outs into a headphone jack.” Click here to visit listing on eBay