# Moog Micromoog
“Vintage analog Moog Mircomoog sythesizer in excellent working condition and excellent cosmetic condition (the only cosmetic flaws are two small holes pictured, one key sitting slightly higher than the rest, and wear on the ribbon pitch bend thing). The only functional quirks are that it sometimes needs to warm up to be in proper scaling. May just need to calibrate it, which is a DIY thing — there are holes in the back through which you can stick a screw driver & turn a little disc to calibrate by ear — though most of the time it’s perfectly scaled from the get go, and it keeps tune really well over time (rare for a moog). There is one mod done to this: the weird “modulation” jack in the back has been replaced with a 1/4″ jack, as I absolutely could not find an adaptor for the proprietary(?) original size (5/18″) jack that was there. This means that the moog can receive a third modulation source (in addition to the filter and osc mod jacks already on the back) and output its lfos as well. Interfacing it with my Doepfer rig was amazing — with the onboard mod, & different things coming into the three jacks, I could get amazing quad modulation going. The replaced jack is stereo like the original, so you need a stereo cord. Was going to set up two mono mini jacks (in place of the 5/18″ one) to be mounted in the two holes I pictured, but the holes I drilled were too small and I couldn’t rustle up a bigger drill bit. The mini jack set up worked great with my Doepfer; I just never mounted them. Also included are several male and female cinch-jones connections — one of which is mounted on a cord with an 1/8″ mono plug at one end — for using the s-trig ins and outs (the cord works great). Anyways, you may have guessed i’m not exactly an electrician, but the Moog is fine, clean, fully functional. Nevertheless, it’s sold as is.” Link