Great condition and works as it should.

Comes with original manual.” Link

Here is my much loved Yamaha CS-15 Analogue synth!

It is in beautiful cosmetic and full working condition.
All pics are of the actual cs-15 for sale.” Link

Die 2. Dx7 Dient als Ersatzteillager…” Link

2 Midi Kanäle (Setups) anwählbar

guter gebrauchter Zustand mit Kurzbedienungsanleitung, Stromversorgung über Batterie (1 Satz inklusive)

Das Keyboard kann mittels “Gitarrengurt” (nicht Bestandteil) umgehängt werden und der Keyboarder kann endlich am Bühnenrand “mitrocken”.

Hinweis: In einer anderen Auktion biete ich einen ideal dazu passenden Yamaha BC-1 Breath Controller an.” Link

geliefert wird:

Tenori On
Midikabel
Netzteil
SD Memory Card mit Soundset
deutsches Manual” Link

No reserve! Low Starting Price.

Condition:

Cosmetic: Good overall, no dings to the case. The biggest flaw is that there is a small chip in one of the keys (see photos) – doesn’t affect functionality. Two of the caps to the pots look like replacements as they have a red line on them rather than white on the others.

Functionality: All sliders switches and pots working as they should. Some pots and switches are a bit scratchy sometimes, so could do with a clean. One key isn’t working (bottom D). A few keys are double-triggering occasionally so again could do with a clean. Basically the synth will play fine as it is, but could do with a service to get it to A+++ functionality.” Link

Included in this auction are:

Tenori-On TNR-W
Original Yamaha mains adapter
Mini DIN MIDI lead
Full documentation including Tenori-On Quick Guide and Software CD” Link

BRILLIANT MONOPHONIC ANALOGUE VINTAGE SYNTHESIZER, AMAZING UNIQUE SOUND, PERFECT FOR ACID SOUNDS, SUB BASS AND LEADS.

THE CS-10 DOESN’T HAVE MIDI BUT HAS CV/GATE, SO CAN BE EASILY CONTROLLED BY A MIDI SEQUENCER USING A MIDI TO CV/GATE INTERFACE (KENTON RECOMMENDED)

THIS SYNTH IS IN AMAZING CONDITION, IT”S CERTAINLY THE BEST ONE I’VE EVER SEEN.

IT’S BEEN FULLY TESTED AND WORKS PERFECTLY, THE SOUND IS AMAZING.

THE YAMAHA FILTERS ARE SUBLIME.

THIS MACHINE IS 100V 50/60HZ, DEPENDING ON WHICH COUNTRY YOU MAY NEED A POWER CONVERTER (READILY AVAILABLE ). IT’S WORTH GETTING A DECENT POWER CONVERTER ANYWAY SO YOU CAN USE OTHER QUALITY JAPANESE SYNTHESIZERS EFFECT PROCESSORS ETC.” Link

This is a 1979 synthesizer, it has a vintage round full sound when compared to other synths. ” Link

You’re bidding for a 1988 Yamaha DX-11. It is in excellent condition.

The DX-11 comes complete with original operating manual, which is in very good condition, and Yamaha’s original publicity/marketing leaflet detailing its features. ” Link

When I picked up this keyboard the internal battery had since died which is a common problem for these now that they are approaching being 30 years old. When I replaced it I went ahead and soldered on a battery clip. You shouldn’t need to replace the internal battery for quite a while (currently the voltage reads 2.8 as you can see from one of the pictures below – 2.2 to 3 volts is the operational voltage range), but if you do need to replace it later then you can simply pop one in thanks to this mod.

This unit is serial number 124526. According to Yamaha (documented at http://homepage.ntlworld.com/steve.sims/) there are issues with aftertouch on some DX7s with serial numbers between the ranges 1001-24880 and 25125-26005. This keyboard falls outside of that range and therefore has no issues. Furthermore I can attest that aftertouch has worked perfectly for me.

I have several pictures below detailing the external and internal condition as well as my battery mod which I mentioned. The only issue is an unfortunate chip and some scuffing with the plastic on the left side which I documented in detail.

Note that these keyboards are built like a tank and therefore are heavy (~23 pounds) so please pay attention to the shipping cost before you bid. ” Link

A DX7 Table Top Midi Synth Plays All DX7 Sounds

Thousands of DX Sounds Available on the Internet

Original Owner Excellent Working Condition” Link

This synth was acquired directly from Paul Humphreys’ ex-wife at the Southern California home where he lived and worked during the 1980′s. It is version 3.2 and has recently been restored to perfect working condition by Audio Rehab, a top vintage synth repair shop in L.A. Cosmetically, it shows the wear you would expect from a work horse of the 80′s OMD sound.” Link

The wooden sides and front show some wear, and it is missing BOTH logo decals on the front. The metal top, back, and faceplate are in good shape, with only minor wear.

It includes an aluminum road case and the complete original manual.

Obviously, this is a vintage unit, heavy and fragile, and should only be considered by someone well-versed in the care and feeding of similar synths. I will work closely with any serious buyer to insure that you know exactly what you are getting. More photos and/or videos available upon request.

This is the third and last T8 I have had for sale – the other two sold for $4K+ over the last two years. For those that might care, these three T8′s were all owned by Eddie Jobson, who tweaked the keybeds for playability, but only used them (as MIDI controllers) for one concert in NYC in 2009.

I will ship just about anywhere (despite the “local pickup only” indication on the listing).” Link

What’s included in purchase:
Sequential Circuits Studio 440

SCSI cable and Zip drive (works fine)

Dust cover from LeCover

Power cables for Studio 440 and Zip drive

Platt case (excellent condition)

A zip with 808 and 909 samples and a few blank zip disks.” Link

Very rare ” Link

This unit has always been in studios, never on gigs. The remote is in pristine condition with an extra long cord. Unit runs nicely within specs. It has the optional SCSI drive working. There is an additional internal cooling fan attached to the CPU which can be removed if deemed too loud. All sounds from all floppy disks are already loaded on the included Syquest cartridge.

What all comes included in this auction:

Main P3000 rack unit with powercord
P3000 Remote with extra long cable
Syquest SCSI Drive with powercord
2 Syquest Cartridges, 1 with 39+ Presets + 1 blank cartridge
Box of floppy disk backups of all sounds including various Wine Country Productions sounds
New Spare Floppy Drive
New Spare Syquest Drive
Various Spare IC’s from Wine Country (some I have are not available anymore)
CN50 to DB25 SCSI Cable and terminator
P3000 Service Data Manual
P3000 Operation Manual” Link

Ich bin 3. Besitzer dieses Denkmals.
Seither steht er in meinem reinen Musikzimmer (tierfrei, nichtraucher) und wurde nach dem Spielen immer abgedeckt.

Die Batterie wurde vor ein paar Wochen erneuert sowie ein technischer Rundum-Check durchgeführt. Das war in all den Jahren der erste Werkstattaufenthalt. Somit unberührter Originalzustand.

Durch das jahrelange “Schonen” ist der Pro 5 natürlich auch optisch in einem hervorragenden Wohnzimmer-Zustand. Nur im Bereich der Spielhilfen finden sich leichte Gebrauchsspuren.
Alles lässt sich leicht und gut betätigen.

Ausgänge Rückseite von links nach rechts: Schalter Record enable / disable
6,3mm Klinke: Cassette Out; Cassette in; Release Footswitch; Control Voltage in Amplifier; Control Voltage in Filter; Sequencer Interface Out: Trigger und Voltage; Sequ. Interf. In: Gate und Voltage; 5-poliger DIN-Stecker: Midi in und out; Klinke: Audio Out; 4-Pol-Buchse mit Schraubmechanik: Digital; 5-Pol-Buchse mit Schraubmechanik: Analog – die beiden Anschlüsse mit Schraubmechanik sind wohl für die Anschlüsse von Sequencer und Remote.

Kein Potikratzen, Kontaktspray oder ähnliche “Hilfen” kamen nie zum Einatz. Für weitere Fragen einfach mailen.

Lieferumfang: Prophet 5, englische Bedienungsanleitung.

Ein Gerät in derart wenig beanspruchten Zustand dürfte eher selten zu finden sein!” Link

I have owned her since 2002, and recently serviced in April this year. As part of the service I have had the keyboard bushings replaced and it plays beautifully.

Sonically gives the true Prophet 5 rich sound famous worldwide.
This is a fully serviced working unit.” Link

Condition:
- All keys work well
- All lights on top panel work
- Power switch light does not work
- Power cord is pulled out a little (see picture 9)
- All sliders (6) are stiff
- Missing one switch cap
- Bottom wood edges are chipped on front and back
- I cannot hear Brass sound when combined with Piano sound but the Vibrato effects section modifies Piano sound. This maybe the way it’s supposed to work. I don’t know. All other combinations work.
- Some scuffs and marks

Features:
- Full 49-key polyphonic
- You can layer sounds on each other by pressing one or more sound button (Brass, Strings, Organ, Piano) for very Moog-like sounds
- Each section has separate controls
- Tuning pot is convienently located on top to right of keyboard
- Original(?) folding brackets are attached to bottom to give it a steeper angle when placed on a flat surface” Link

with cables, original printed user manuals and CD ROM with service tech infos !

DAS IST DER KOMPLETTESTE ARP ODISSEY DIE SIE BEI EBAY FINDEN KÖNNEN ! !

THIS IS THE MOST COMPLETE ARP ODDISEY THAT YOU CAN FIND ON EBAY !

Download Detailed Photos : ARP-ODISSEY.rar

ARP ODISSEY ( 1978 )…………. s/n 0121 ( ! ! )
LITTLE BROTHER ( 1980 )….. s/n 29520014

- Filter Type model 4075
- Control Boards A-II, B-II, C-II
- Rotary Knob
- External CV/Gate+Trig
- Capacitors ( Elko ) perfect without tech problem ( E.S.R. etc.. )
- absolutely without traces of dust
- perfect slide potentiometers
- perfect keyboard
- There are no cigarette stains or similar damages ! ( Keine Zigaretten-Brandflecke o.ä. ! )
- Perfect Power Supply Unit for all two Synthesizers” Link

guter zustand gebraucht -fetter filter-

4 knopfkappen ersetzt gut- mit 300 analogsyntpläne-cd

mit behringer ultra chorus-pedal uc200 neues” Link

8 X Oberheim SEMS
1 X Oberheim 8 Voice Programmer
1 X Keyboard module (w/ portamento etc)
2 X Output modules (8 channels of discrete mixing)
Rack power supply (please note that this unit is set up for European power – but can be used with a converter in the US)
Custom Midi to CV interface
All build into a road case (case included)

Some of the modules are in front of the rack and 2 SEMS plus keyboard module and power supply are racked in back of the rack.

I listed this as “non-working” only to set expectations lower so you know that if you buy it there will be some work required. How much work is unknown though. While it is being sold AS IS with no returns, I can tell you a couple things that will give you confidence in buying it. There’s nothing known to be actually wrong with it. In fact, I believe all of the SEMS function just fine. I have a binder with all the information on how to connect it all up plus all sorts of details. I just don’t have the time to get into it. If I do have my tech go through the whole thing, fix anything if he finds a problem (which is easy by the way because SEMS are all discrete! no rare chips or anything) then I’ll either keep it or relist it at a higher price. This is a chance to get it for thousands less and take a small risk on what it would take to get it 100%.

I also don’t mind keeping this either as SEMS are some of the best sounding analog synths ever made. The filter is incredible! To have 8 of these racked plus the other modules of an 8 voice is really powerful. It doesn’t have all the patch points brought out but that’s not hard to do for a tech, just a bit time consuming. I do have a few extras I can throw in though like a mini jack patchbay with tons of cables connected to it and an Oberheim pitch and modwheel module that supposedly works with this 8 voice. It’s the levers like later Oberheims. I have no idea if that works though. But if you buy this you can have it plus a few other things depending on what it ends up going for. ” Link