Synthfind

“This Item is in Mint condition” Link

“A great sounding analog oscillator made by Mark Verbos that works in Buchla systems. Popular for use in 200e systems.
Usually, there is a wait associated with getting one of these, but this one is sitting on my workbench.” Link

“This will be needed in any 200e system. Get it with no waiting.” Link

“This item is in mint condition” Link

“This Modular Synthesizer is in mint condition.” Link

“FOR SALE: Rare and highly desirable vintage RA Moog 907 Fixed Filter Bank with an added original RA Moog 904b Voltage Controlled High Pass Filter, added to its chassis. This is a vintage RA Moog 907 modified with an added vintage RA Moog 904b. Great idea, great workmanship but not for me. Unit is in working condition. Faceplate has some minor blemishes as well as some impact signs (slight bend top right corner). ” Link

“Here we have a vintage electronics diy kit. We know little about this type of item and the information we have provided in this description is what we found from various sites on the internet. That being said,this item is sold as is as shown /described nonworking for parts or repair no returns, please understand this.

This is what we believe to be a PAIA 4700 series kit that was sold in the 70′s-80′s. We think it has been upgraded because some of the modules are 8700 series.(but of course we could be wrong on that point). This unit looks great with minor scratches/scuffs and rubs here and there. The vinyl covering on the case is near mint with no cuts or tears. The case is missing 3 of the little rubber feet and it is missing a few screws from some of the modules(these are used to hold module to the case).

The case is hinged and folds open to gain access to the control modules. The left side contains the following modules. Top row from left one 8780 equally tempered da converter and has a 25 pin ITT cannon db 51226-1a plug coming from it. The next three modules are 4720 VCO. Bottom row from left two 8781 QUASH two 4710 balanced modulator and one 4761 WING.

The right side top row from left contains one 4771 regulated power one 4740 envelope generator and one4711 4/2 mixer. Bottom row from left one 4761 wing with a power cord coming from it one unumbered control oscilator and two 4730 VCF.

We removed two of the modules so that we could show some of the inside. Everything appears to be hooked up and operable. As mentioned above, it has a power cord but we have not plugged it in. Also, as mentioned above, it has a plug that we think goes to a keyboard or other type of instrument. It has the name BRIAN ENGELBRECHT handwritten inside the case(maybe the person that put it together?).” Link

“Plan B Model 12 MKII State Variable Multimode Vactrol Filter

The Model 12 Mark II is a creamy-smooth two pole, vactrol driven State Variable multimode filter with simultaneous outputs for lowpass, bandpass, highpass and allpass taps. Independent controls for both resonance and bandwidth yield a plethora of sonic possibilities, from in-your-face wah to subtle spectral coloring.

An internal AGC (automatic gain control) circuit assures linear energy output even in high Q applications, while a unique bandwidth pot allows for user-selectable mixtures between first pole (6db/oct) and second pole (12dB/octave) outputs.

The M12 was intentionally designed NOT to oscillate and focuses instead on what vactrol filters do best – the net result being both incredibly smooth and impeccably musical. But don’t let the cream spoil you — the input level pot has been scaled to 11 and will merrily crush, twist, gnash and otherwise spew anything passed through it. You ain’t heard fuzz tilll you’ve heard vactrol fuzz.” Link

“TIPTOP AUDIO Z 8000 MATRIX SEQUENCER
Modul is in fantastic condition. ALMOST BRAND NEW” Link

“BANANALOGE SERGE VCS

Modul is in fantastic condition. ALMOST BRAND NEW” Link

“This is the latest version of SPH-1 with Feedback CV input.
I bought it in Spring 2011 from Schneiders Büro Berlin.” Link

“Slightly used in excellent condition: ” Link

“CLUB OF THE KNOBS C 911 ADSR Envelope Generator COTK, wie Moog

Verkaufe meinen CLUB OF THE KNOBS C-911 ADSR Generator, weil ich nun doch bei .com geblieben bin, des Preises wegen. Der C911 sollte funktionieren und kommt so wie auf dem Foto zusehen, mit Anschlusskabel.” Link

“This is an amazing 7 output oscillator from Bubblesound (Doeper compatible, Eurorack). Comes with ribbon connector and screws, of course.” Link

“On offer are a pair of the Digisound 80-2 Voltage Controlled Oscillator modules from the mid 80s that are in excellent condition. These oscillators use the very stable CEM3340 VCO ICs (Worth quite a lot on their own), are calibrated to the standard 1V/Octave, and have a frequency range of 5Hz to 10kHz. There are four 0 to 10Volt waveform outputs for Triangle, Sawtooth, Pulse and Sine and also +/- 5Volt outputs of Sine and Triangle waveforms. The 80-2 module has extensive Modulation and Syncronisation capabilities and both modules have just been fully recalibrated. Note that they have been calibrated using a very accurate and stable +/- 15 Volt supply. When connected to another supply they may need slight recalibration to cater for Votage Supply differences. The construction and calibration details are included.

I had these VCOs as part of a homebuilt modular system but they are now no longer required since I completely rebuilt the system and used VCOs that match the rest of the modules.

NOTE THAT THESE MODULES REQUIRE +/- 15 VOLT POWER SUPPLY.” Link

“Expert Sleepers ES-3 module for Doepfer-style Eurorack modular synthesiser. A pretty specific piece of gear that works with Expert Sleeper’s Silent Way plugin to convert MIDI into Control Voltages used by modular synthesisers via ADAT cable.

Hardly used, and fully working – I’m selling it as I’ve decided to move away from using my PC to control my modular. I’ve included a 1m ADAT cable as I won’t have a use for it after selling the module.” Link

“Dalek Modulator mit Doepfer und Livewire Kabel.
2x VCO out, ring modulator in, 2x external in for ring modulator, 2x CV in” Link

“Verkaufe meinen Blacet “Klang Werk” – Stand Alone – Ringmodulator, da ich mich langsam von allen Analogitäten trenne. Ich habe ihn selbst gebaut. Er ist eingebaut in ein Pultgehäuse. Die Miniklinken-Buchsen habe ich entsprechend meinen Anwendungen durch 6,3mm Klinken ersetzt und extern ins Gehäuse eingebaut. Das alles ist aber wieder Rückgängig zu machen, so daß man das Modul normal im Rack benutzen kann. Man muß nur ein wenig löten. Im Moment ist die Stromversorgung durch ein MFOS – Wall Wart Bipolar Supply + externes Netzteil – AC 12V gewährleistet. Kann bei Interesse für 25,00€ miterworben werden, sonst bau ich es aus. ” Link

“This listing is for a Doepfer A-124 VCF5 Wasp Filter module. The unit is 100% functional and in nice cosmetic condition as well. It will come as shown below in the pics so take a peek. ” Link

“his listing is for a Cwejman S1 MK2 semi modular analog synthesizer. The unit is 100% functional and in nice condition as well.” Link

“Excellent smooth sounding High-end VCO. Selling to fund a guitar amp purchase.

Hardly used, minimal rack rash, includes screws. ” Link

“Nice used Intellijel µScale module.
CV quantizer and musical interval generator in 4hp.
This module was used very little and works perfect.

Auction includes the power cable, and 2 mounting screws.” Link

“Kilpatrick Audio k4815 Pattern Generator

You are bidding on the Kilpatrick Audio k4815 Pattern Penerator Eurorack Module in great condition. This Module has been exclusively adult owned and operated in a smoke free environment. It comes with power cable, original box and screws. It was purchased in February of this year from Analogue Haven” Link

“Very cool CV controlled Bit Crusher. Make your synth or any sound source, sound like it’s an old Atari game, or C64. The feedback switches bring in a new level of sonic destruction. For more info, please click here to visit the website of the harvestman. In great shape, 100% working – comes in original box with Doepfer power ribbon and mounting screws.” Link

“Blacet Frac Rack Hex Zone. Rarely used. User assembled kit. Kester “no clean” solder on all connections. Gold plated machined pin sockets on ICs. Very minor “rack rash” around screw holes. Includes power cable and user manual. Used and sold as-is. Worked when last tested.” Link

“Blacet Frac Rack Binary Zone. Rarely used. User assembled kit. Kester “no clean” solder on all connections. Gold plated machined pin sockets on ICs. Very minor “rack rash” around screw holes. Includes power cable and user manual. Used and sold as-is. Worked when last tested.” Link

“Very interesting 3 Oscillator synthesizer signal generator. I beleive this to be working but I cannot guarantee it. It will take some work to get it running properly. I bought it myself as I’m interested in experimenting with sound and I liked the old principles of it’s design. The sides of the unit are open and the casing isnt to sturdy. It’s powered by a standard kettle lead input in the back. I’m going to put a disclaimer on this as I woud’nt want anyone unqualified to electrocute themselves so please only qualified people in electronics should attempt to work on this. There are a couple of switches missing missing on the lowerpart of the unit but I believe the switch mechanisms are inside. Sold as seen.” Link

“Nice used Harvestman Hertz Donut module.
This module was used very little and works perfect.

Auction includes the power cable, and 4 mounting screws, and the original box.” Link

“Nice used Harvestman Double Andore module.
This module was used very little and works perfect.

Auction includes the power cable, and 4 mounting screws, and the original box.” Link

“Verkaufe Analoges Modularsystem von Doepfer.
Es handelt sich um das komplette Basis-System1 plus 2 zusätzliche Module A119 External Input/ Envelope Follower, A125 Voltage Controlled Phase Shifter!!
Das Basis-System1 besteht aus folgenden Modulen im 6HE Rahmen mit eingebauten Netzteil:

2x Standard-VCO A110
1x Ringmodulator A114
1 x Audio-Divider A115
1 x VC Waveform-Processor A116
1 x Noise/Random A118
1 x VCF1 A120 (24dB Tiefpass 1)
1 x VCF2 A121 (12dB Multimode Filter)
1 x linearer VCA A130
1 x logarithmischer VCA A131
1 x linearer Mixer A138a
1 x logarithmischer Mixer A138b
2x ADSR A140
2 x LFO A145
1 x Dual-S&H A148
1 x Dual VC Switch A150
1 x Trigger-Teiler A160
1 x Trigger-Sequencer A161
1 x Dual-Trigger-Delay A162
1 x Dual Slew Limiter A170
1 x Multiple I A180

und zusätzlich, wie schon beschrieben, A119 und A125!!

Mit dabei ist die Bedienungsanleitung, ein Kaltgerätekabel und Patchkabel.
Das System wurde selten und nur im Studio benutzt und funktioniert einwandfrei.
Die beigelegten Patchkabel sind jedoch die älteren von Doepfer gelieferten, die ab und zu aufgrund des gerinfügig zu kleinen Durchmessers, Kontaktprobleme in den Buchsen haben können.
Hat mich im Studio nie gestört, da das mit etwas Wackeln immer beseitigt werden kann. Wie gesagt, das liegt an den Kabeln und nicht an den Buchsen. Inzwischen gibt es von Doepfer neuere, die dieses Problem nicht mehr haben.

Der Synthesizer klingt super, da kommt kein Plug-In mit und bietet unzählige Sound- und Erweiterungsmöglichkeiten mit anderen Modulen im 3HE- Format.” Link

“Blacet Frac Rack Mini Wave. Rarely used. User assembled kit. Kester “no clean” solder on all connections. Gold plated machined pin sockets on ICs. Very minor “rack rash” around screw holes. Includes power cable and user manual. Used and sold as-is. Worked when last tested.” Link

“Being sold AS IS. I did not use this as a head phone amp., I used it to send signal out to my oscilloscope. Worked great for mono. When I was testing for this sale (w/ head phones) only the left side of the head phone worked. If your handy with a soldering iron, this might be a great little project for you. With the open back design of these mods, makes it easy to test and work on.” Link

“I should mention a couple issues:

There is some slight bleedthrough of oscillators 1 and 2 into mixer outputs 1 and 2, respectively. Not noticeable at typical levels, really only if you are using the mixer as your main output.

Cosmetically, there is a small chip on bottom edge of front panel, beneath oscillator outputs. There are some other markings along this edge. I think this came from being set down on top of a too-rough surface for a week or two. There’s also some scuffing and scratching on rear panel. Don’t know where this came from. Had this synth stored safely in a box for most of the time I have owned it. Never gigged with it. I have used it less than 50 times, I think. I am the original owner. I bought the synth several years ago from Shawn Cleary at Analog Haven.

Includes user manual, the original high-quality patch cords that shipped with the synth, and power cable.

I will pack this synth very securely so that it arrives at your location in great, instantly playable condition. Shipping is fully insured. USA destinations only.

The synth is switchable between 115V/230V power.

S/N S1mk2-023″ Link

” Up for auction is a used Synthesis Technology MOTM 100 Module. It generates analog noise as well as a versatile Sample and Hold circuit and vibrato outputs. It works perfectly. I bought it second hand and the build is very clean. The module is a few years old, but works great. Looks great too, just has a little screw rash.
It comes with a power cable. ” Link

“Digi delay sound destroyer. Too much to try to describe. So many cool little features that add up to a really big amount of control. Goes from a straight up, clean digital delay to a “circuit bent” sounding, bit crushing, music mangler. You can reverse the sound going thru with a trigger or by hand. . . the list goes on and on. The Sound of Thunder (included) adds more destruction to the mix.

“the tyme sefari is expandable with a series of switches for “circuit bending” the behavior of the module, model 1973a “sound of thunder”. these switches short out parts of the data and address busses, resulting in effects just like a modified casio sk-1. the glue logic within the tyme sefari is laid out in a similar way to the sk-1, so the changes in sound are quite similar. however, the front-panel operation of tyme sefari remains predictable when the expansion is active.”

The TYME SEFARI will ship, box (original) in a box. Comes with six mounting screws, three 17inch 1/8 to 1/8 patch cables and the 1973a Sound of Thunder expander unit. Doepfer power ribbon and connecting ribbon for the Sound of Thunder to the Tyme Sefari.” Link

“Beschreibung

Bratigel analog Modularsystem im 19 Zoll Rackgehäuse 7HE , Tiefe im Rack ca. 24cm ,Top Zustand
2 VCO (identisch mit Pro One mit CEM 3340) Oktavschalter vom Minimoog , Mischbare Wellenformen,schaltbarer Glide
1 Suboscillator mit Oktav u. Quint Schalter ,schaltbarer Sync, alle Wellenformschalter mit LED AnzeigenMixer auch mit ext.Input
VCLFO -Pulse Out,Clock Out,Saw Out und regelbarer Tri Out
Ringmodulator (wie Moog Sonic Six)
SSM Filter 24dB Tiefpass mit steuerbarer resonanz
SSM ADSR
log VCA
Noise
großes Steckfeld in der Mitte alle Kinkenbuchsen 6,3mm

Viele orig. Minimoog Knobs.
Das System läuft mit gängigen 1V/Oktave und pos. Gate und läßt sich mit den gebräuchlichen Midi Interface steuern oder mit Analog Sequencern.

Guter Zustand , anschlußfertig 220V mit Netzkabel und Netzschaltern auf der Rückseite ! Patchkabel gibts viele mit dazu.” Link

”
Mit neuestem Eprom (neuestes Betriebssystem, bei dem ein paar Bugs beseitigt wurden),
Netzteil nicht original, aber gleiches Fabrikat (erst wenige Monate alt) und von Flame bzgl. der Daten abgesegnet.
Äußerlich etwas größer, dafür erfreulicherweise keine “Wandwarze”, sondern mit normalem Stecker, an dem das
Netzteil hängt.

Das Gerät funktioniert einwandfrei und ist in einem super Zustand.
Mittlerweile nicht mehr neu zu bekommen. ” Link

“I know nothing about FM synthesis. But minutes after racking the unit I was getting killer one shots, leads and big-ass bass. You don’t need to be a super scientist to use this thing. Tons of control. Racked only once, in great shape. Comes with Doepfer power ribbon and four mounting screws. Ships box in a box. Original box included. Also in the box will be five 17inch long 1/8 to 1/8 patch cables.

dual digital oscillator with internal modulation bus. voltage-controlled waveform discontinuity, internal pitch tracking with several lag settings. dedicated square wave outputs, and a multi-purpose gate/xor ringmod output.” Link

“Malekko Waird Anti-Oscillator VCO Euro rack format.

Very good condition hardly used.

Analog waveshaping oscillator Module” Link

“This is a Blacet Miniwave that functions perfectly and is in excellent condition.” Link

“Blacet Dark Star Chaos 2000 Frac Rack style module for modular synth. Long out of production, this is one from the final run of these modules. Gently used, works as new. Factory built. Comes with power cable and manual.” Link

“Doepfer A-136 Distortion Waveshaper” Link

“PAIA MODULAR SYNTHESIZER

This kit-built 70′s synth comes from the original owner and is complete with manuals/schematics for each module, cables, and custom patch sheets.

Modules in the system:
4761 Wing Power
4720 VCO x2
4780 Sequencer
4740 Envelope Generator
4770 Watt Block x2
4730 VCF
2700 Inverter Buffer
2700 Envelope Follower
2700 Control Oscillator
2700 Balanced Modulator
2700 VCA

This PAIA setup is in excellent cosmetic condition, never having left the original builder/owner’s studio. It powers on and the sequencer clock runs. The sequencer will only go through about 10 steps and then stop and not cycle through. I wasn’t able to get any sound out of any of the modules. The system is sold strictly as-is. With all the documentation, it should be an easy DIY restoration project.” Link

“Blacet Hex Zone 16 Step Sequencer Factory Built w/ power cable and laminated Programming Instruction Card. No assembly manual.

Gently used condition, works perfectly as it should.

A great little sequencer for Frac Rack based synths. If you know Blacet, you know it is packed with extra features.” Link

“Flame Talking Synth box. Comes with power supply and manual. I have used this for about 2 hours total, listed as used but in flawless condition. Selling because it is not used, and I am cleaning gear out of my studio. This unit has a unique, midi-controlled “talking synth” sound that can range from robotic, Kraftwerk-like voicings to other-worldly vocal sounds, based on the Speakjet chip. No longer in production, this is a boutique and unique little unit. ” Link

“You’re bidding on a Harvestman Kuzminorgel eurorack module.

Great condition – slight rack rash where it’s been mounted, but otherwise good. Boxed with mounting screws. ” Link

“You’re bidding on a WMD Geiger Counter eurorack module.

Great condition – tiny bit of rack rash where it’s been mounted, but otherwise good. Comes boxed with mounting screws. ” Link

“Zum Verkauf steht dieser:

ICA FORMANT SYNTHESIZER

Er beeinhaltet : 4 VCOs, 2 VCFs( 1x12dB 1 x24dB) , 1 COM, 1 NOISE , 1 LFOs, 2 ADSRs, 1 Dual VCA , power supply
Das Keyboard umfasst 4 Oktaven.

Das ganze System ist seeehr sauber und fachmännisch aufgebaut und funktioniert/klingt sehr gut !!

Nur Abholung. Besichtigung möglich. Ebenso weitere Bilder.” Link

“Perfect condition, only a few months old. Selling to get funds for more gear.
Add some digital waveforms to you modular system with Harvestman’s Piston Honda.” Link

” This posting is for a Ensoniq ESQ-1 Vintage Synthesizer. Excellent condition. You can read all about at: http://en.wikipedia.org/wiki/Ensoniq_ESQ-1. It also includes power cord (not shown) and soft Yamaha case (see picture).” Link