Korg, MS-01 @ 24 June 2017, “No Comments”

“Korg ms-01 foot controller in good condition.” Link

Korg, MS-01 @ 18 February 2017, Comments Off on Korg MS-01

korgms01
The OPERATIONS MANUAL is Also INCLUDED with the Pedal.

This pedal is in VERY GOOD CONDITION. Absolutely NO ISSUES. Everything Works.” Link

Korg, MS-01 @ 10 September 2016, Comments Off on Korg MS-01

ms-01 “This Korg MS-01 foot pedal looks really good but I don’t have anything to test it. Sold as is” Link

Korg, MS-01 @ 10 January 2015, Comments Off on Korg MS-01

korg ms01“Vintage Korg MS-01 Foot Controller.
Tested and works great.
Voltage controller and attenuator. Works great with Korg MS series synth or anything with CV input.
It requires regular 9v battery to operate.
This is a rare find. Enjoy!” Link

Korg, MS-01 @ 11 October 2014, Comments Off on Korg MS-01

usedms01” Found this pedal at a garage sale. Had to save it from getting thrown out. It’s a vintage Expresson pedal, produced in Japan. Very high-quality construction. It just needs a little bit of cleaning.” Link

Korg, MS-01 @ 20 September 2014, Comments Off on Korg MS-01

usedms01“A vintage Expresson / foot controller pedal for organ or synth. Really high-quality & durable construction.

I found this pedal at a garage sale, brand new in packaging. I only removed it to take pictures and to make sure it’s condition was good. I believe this original pedal was manufactured in Japan. I found a similar quality pedal at the same sale, but not nearly as new as this one.” Link

Korg, MS-01 @ 15 February 2014, Comments Off on Korg MS-01

“up for auction 1 used korg ms-01 foot controller.
seems to work fine, both of the voltage controls and the attenuator.
the feet seem wrong, there is a on off switch that seems wrong as well.
item sold as is.” Link

Korg, MS-01 @ 17 August 2013, Comments Off on Korg MS-01

” KORG MS-01 UNIVERSAL FOOT CONTROLLER
This piece is in excellent working condition. I believe it was manufactured in the 70’s. Below, we have copied & pasted some information off of the web :
The universal foot controller for live performance. Equipped with a voltage processor to provide control voltages for all synthesizer modules. Plus, the built-in attenuator is perfect for volume and vibrato depth variation while performing.” Link

Korg, MS-01 @ 04 May 2013, Comments Off on Korg MS-01

“For the Korg MS completist, here we have a Korg MS-01 Attenuator Foot Controller pedal in very good condition. Shows hardly any sign of use and still has the protective card inside with no sign of battery leakage. I am unable to test this unit so it is being sold as seen.” Link

Korg, MS-01 @ 02 February 2013, Comments Off on Korg MS-01

“This pedal is working good, some scratches here and there for the normal use.” Link

Korg, MS-01 @ 22 September 2012, Comments Off on Korg MS-01

“The MS-01 is a foot pedal to control various functions on the MS-10, MS-20 and MS-50 such as volume or modulation depth. Owner’s manual readily available on line. This one works great and is in G+ cosmetic condition as depicted. If you have one of these Korg synthesizers, then you need this pedal. Although designed specifically for Korgs, probably also would work with other synths too. ” Link

Korg, MS-01 @ 07 July 2012, Comments Off on Korg MS-01

“This pedal is working great, some scratches here and there, working as new. Thanks” Link

Korg, MS-01, MS-20 @ 27 August 2011, Comments Off on Korg MS-20 with MS-01

“This MS-20 is in perfect working and very good condition!!

This unit was professionally checked/serviced/cleaned.

and come with foot controller MS-01 and patching cable.

This item is 100v 50/60hz. you may need a power converter depending on your country” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 02 July 2011, Comments Off on Korg MS-01

“VINTAGE KORG MS 01 CV PEDAL

With the pedal you can send +4v, -4v, for cv, and there is an attenuator input and output jacks. There are some scratches here and there, no ruber legs just screws, and you can see the aluminum in the face plate for the foot, there is a little adaptation made with a rivet, that you can see in the pictures, this doesn´t afect the pedal in any way. Is working good and you can send CV control for synths, pedals, rack devices, a number of stuff with Control Voltage (CV control). No reserve…….. Thanks” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 04 June 2011, Comments Off on Korg MS-01

“Rare foot pedal for use with korg ms 10 20

“Universal foot controller for live performance. Equipped with a voltage processor to provide control voltages for all synthesizer modules. Plus, the built-in attenuator is perfect for volume and vibrato depth variation while performing.

Thankyou for choosing the Korg Foot Controller MS-01. The MS-01 is a special type of foot control unit designed to give complete foot control of all synthesizer functions. Besides giving control of each module of the Korg MS-10 and MS-20 synthesizers, this pedal is also equipped with an attenuator so that it can be used to control volume or MG modulation depth.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 09 April 2011, Comments Off on Korg MS-01

“Original, Working, Excellent Shape, Built to last expression pedal for MS-10, MS-20, MS-50, and works on many other applications. I am only selling because I have 2 and I never use them both at the same time. Very handy for live performances and for use with old CV Gate equipment.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 18 September 2010, Comments Off on Korg MS-01

“Vintage Korg MS-01. Equipped with a voltage processor to provide control voltages for all synthesizer modules. Plus, the built-in attenuator is perfect for volume and vibrato depth variation while performing. It’s missing two of the bottom rubber feet but other than that is in great condition. Still has plastic on the sides. ” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 03 July 2010, Comments Off on Korg MS-01

“NEW

KORG MS-01 Foot Controller

specifications :

1. VOLTAGE PROCESSOR [bullet] Outputs x 2 (0V~+4v, 0V~-4v)
2. ATTENUATOR [bullet] Input x 1, Output x 1 (0~100%)
3. DIMENSIONS [bullet] 100 (W) x 60 (H) x 250 (D) mm
4. WEIGHT [bullet] 0.9 kg
5. POWER CONSUMPTION [bullet] Dry Battery (006P x 1.9V)

With the MS-01, you can control all synthesizer modules by foot” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 15 May 2010, Comments Off on Korg MS-01

“You are looking at a vintage Korg MS-01 Foot Controller pedal.

It is in relatively good condition, but is clearly ‘used’ with a few chips to the black paint, and the box and booklet are missing. It is however in full working order.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 06 March 2010, Comments Off on Korg MS-01

“Up for sale is an extremely rare Korg MS-01 foot controller for Korg MS series synths.

If you’re reading this then you probably know what it is so I’ll save on the details.

This pedal is in mint / near mint condition for it’s age.

Works great, battery clip in perfect condition.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 28 November 2009, Comments Off on Korg MS-01

ms01 “Korg MS -01 Rarität

Original Pedal zur Korg MS Serie (MS10; MS20; MS 50)

auch für alle anderen Synth mit CV Eingängen nutztbar

nur NR Heimstudio, bzw gutverpackt in Schublade (20 Jahre)

CV Steuerung -4-0V 0-4v
wird mit 9V Blockbatterie betrieben

zusätlicher attenuator

optisch 1A” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 03 October 2009, Comments Off on Korg MS-01 CV Pedal

ms-01 “Rare Vintage Korg MS-01 Foot Controller / Foot Pedal for use with the Korg MS Synth Series. This Pedal Can Be Used with Other Synths Out There as Well. This Pedal is Awesome and Worth The Price because there is nothing out there like it , you need powered cv control on a pedal to use with the MS Synths & This is the best thing you can get for Foot Sweeps. You Can Control the Filter Cutoff with Your Foot to free Up An Extra Hand to play the Synth. This Pedal Comes to you In the Original Box With the Original Instuctions and in Excellent Condition. It was Used for a Little while and Then Put Back in the Box and Stored Away. This Item is Sold AS IS So Please Research What You are Buying. This is not a Wah Wah Pedal. This Is a Hard To Find and Extremely Useful Pedal & If you have an MS20 You NEED It.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 18 July 2009, Comments Off on Korg MS-01


“The MS-01 is a special type of foot control unit designed to give complete control of all synthesizer functions. This pedal is equipped with an attenuator so that it can be used to control volume or M G modulation depth. Uses a 9 volt battery( not included). Remove rubber feet on bottom to install/access battery. Includes owners manual which describes in detail the uses for this unique pedal. This pedal is over 20 years old and shows wear but works fine. Heavy duty metal housing.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 27 June 2009, Comments Off on Korg MS-01


“Auction is for a awesome rare Korg MS-01 cv pedal for use with the korg ms series though there are other synths out there that it could be used with. These are really cool and worth the price because there is nothing out there like it, you need powered cv control on a pedal to use with the ms synths and this is the best thing you can get for foot sweeps. You can control the filter cutoff with your foot to free up an extra hand to play the synth. This comes IN THE ORIGINAL BOX WITH MANUAL! It’s in great shape and works fine, one small scratch but overall excellent shape.” Auction ended. Click here to browse on eBay.

Korg, MS-01 @ 09 May 2009, “1 Comment”


Description (revised)

Here is a nice example of the original MS-01 Voltage control pedal, made

as a companion controller for the Vintage Korg MS line of synths.

You can use it to control many of the synths parameters by foot , filter sweeps, modulation speeds etc.

I purchased this to use as a tape speed pedal for my Korg SE-500, however I did’nt

get the result I was looking for, got nothing to do with the pedal , more so the SE-500.

If you are a vintage analog synth head you know what this is and that it is hard to come by.

This one really does look new and is 100% functional” Auction ended. Click here to browse on eBay.