Synthfind

“Verkaufe hier eines meiner überzähligen Module von Doepfer für das A100 Modular-system (Analog-synthesizer). Passt in jedes Rack im Eurorack-format.
Oberfetter Sound, weil ANALOG!

Privatverkauf: keine Rücknahme, keine Garantie, keine Gewährleistung oder Sachmängelhaftung.” Link

“This is the Doepfer A-188-1d BBD delay module with the 4086 chip for long delays.” Link

“Here is a Doepfer A-110 Standard Vco in very nice condition it has some screw rash but it sounds super fat!!” Link

“Up for auction is a used but in great condition Doepfer A-141 Module. The module comes as pictured with rack screws and ribbon cable.” Link

“This is for a like new doepfer dual slew limiter for a porta slide effect. ” Link

“Doepfer A-137 Voltage Controlled Wave Multiplier in excellent condition and in full working order.

Some “rack-rash” around the mounting screw holes (see photo) but nothing serious.

Comes with power ribbon but no box or instructions.” Link

“Up for sale is a 100% functional Doepfer A-143-2 Quad ADSR module.

In excellent condition , with the usual slight rack rash around the screw holes that cannot be seen when mounted.

Can be used as four separate ADSR modules or chained as a cascading envelope chain or even looped back on itself for droning , morphing and other uninterrupted envelope awesomeness.

I am scaling down my Euro set-up to 6U , so this has to go.” Link

“This auction is for;

Doepfer A-104 trautonium formant filter.

Almost new and unused. I had a play, thought this is an excellent module, it is similar to another module I already have so I dont need two similar things.” Link

” Up for sale are 2 powerful and fun synthesizer modules in Eurorack format, one Doepfer A-188-1d (4096 stages) & one Flame Clockwork (eurorack). Modules are in perfect condition and expected to work 100%. Both come with 10pin cables. ” Link

“For auction is a Doepfer A-145 LFO for eurorack format modular synthesizers. This LFO has a little bit of rail mounting rash (try to find a used eurorack module that doesn’t!) and works great. Ships with a power cable and mounting screws.” Link

“Doepfer A-110 Standard VCO (Voltage Controlled Oszillator) zu verkaufen. Voll funktionstüchtig, keine Kratzer, nur die üblichen Gebrauchsspuren im Bereich der Löcher durch das Anschrauben ins Rack. Etwa ein Jahr alt. Natürlich mit Schrauben und Anschlusskabel. ” Link

“Up for sale is my complete Doepfer system in absolutely fantastic shape. Cared for like a baby, never gigged, been in my studio since I got it.

This system has everything from nuts & bolts “vanilla” modules to weird & wacky, to a sequencer. A truly perfect system. Also included is a bundle of cables, and I will also throw in the case for free if you want to pay to ship it (though the case would probabaly cost $50 extra to ship by itself, and it’s sort of a cheap case).

NOT Included – but pictured, is one of the A140′s and the A110.

The total price of this system NEW is $5400.00, not including cables or case.

Here are the modules included:

A136 Distortion/Waveshaper
A111 High End VCO x 3
A116 Waveform Processor
A125 Phase Shifter
A138 Mixer x 2
A118 Noise
A148 Dual Sample & Hold
A112 Sampler
A119 External In
A120 VCF
A124 VCF5 Wasp Filter
A146 LFO2
A147 Voltage COntrolled LFO
A145 LFO
A140 ADSR x 3
A162 Trigger Delay
A180 Mult
A181 Mult
A155 Sequencer
A106-1 Xtreme Filter
A131 exponential VCA
A130 Linear VCA
A171 Slew Limiter
A196 Phase Locked Loop
A107 Multiple Morphing Filter
A-100 g6 case and psu x2″ Link

“This listing is for a Doepfer A-124 VCF5 Wasp Filter module. The unit is 100% functional and in nice cosmetic condition as well. It will come as shown below in the pics so take a peek. ” Link

“Excellent smooth sounding High-end VCO. Selling to fund a guitar amp purchase.

Hardly used, minimal rack rash, includes screws. ” Link

“Verkaufe Analoges Modularsystem von Doepfer.
Es handelt sich um das komplette Basis-System1 plus 2 zusätzliche Module A119 External Input/ Envelope Follower, A125 Voltage Controlled Phase Shifter!!
Das Basis-System1 besteht aus folgenden Modulen im 6HE Rahmen mit eingebauten Netzteil:

2x Standard-VCO A110
1x Ringmodulator A114
1 x Audio-Divider A115
1 x VC Waveform-Processor A116
1 x Noise/Random A118
1 x VCF1 A120 (24dB Tiefpass 1)
1 x VCF2 A121 (12dB Multimode Filter)
1 x linearer VCA A130
1 x logarithmischer VCA A131
1 x linearer Mixer A138a
1 x logarithmischer Mixer A138b
2x ADSR A140
2 x LFO A145
1 x Dual-S&H A148
1 x Dual VC Switch A150
1 x Trigger-Teiler A160
1 x Trigger-Sequencer A161
1 x Dual-Trigger-Delay A162
1 x Dual Slew Limiter A170
1 x Multiple I A180

und zusätzlich, wie schon beschrieben, A119 und A125!!

Mit dabei ist die Bedienungsanleitung, ein Kaltgerätekabel und Patchkabel.
Das System wurde selten und nur im Studio benutzt und funktioniert einwandfrei.
Die beigelegten Patchkabel sind jedoch die älteren von Doepfer gelieferten, die ab und zu aufgrund des gerinfügig zu kleinen Durchmessers, Kontaktprobleme in den Buchsen haben können.
Hat mich im Studio nie gestört, da das mit etwas Wackeln immer beseitigt werden kann. Wie gesagt, das liegt an den Kabeln und nicht an den Buchsen. Inzwischen gibt es von Doepfer neuere, die dieses Problem nicht mehr haben.

Der Synthesizer klingt super, da kommt kein Plug-In mit und bietet unzählige Sound- und Erweiterungsmöglichkeiten mit anderen Modulen im 3HE- Format.” Link

“Being sold AS IS. I did not use this as a head phone amp., I used it to send signal out to my oscilloscope. Worked great for mono. When I was testing for this sale (w/ head phones) only the left side of the head phone worked. If your handy with a soldering iron, this might be a great little project for you. With the open back design of these mods, makes it easy to test and work on.” Link

“Doepfer A-136 Distortion Waveshaper” Link

” This posting is for a Ensoniq ESQ-1 Vintage Synthesizer. Excellent condition. You can read all about at: http://en.wikipedia.org/wiki/Ensoniq_ESQ-1. It also includes power cord (not shown) and soft Yamaha case (see picture).” Link

“This is a Doepfer A188-1c BBD Module, the one with 2048 stages. Minor scratches at the screwholes, comes with ribbon connector and screws, of course.” Link

“In good condtion working perectly. Some label residue on the front panel but I’ll remove that before sending. No longer needed and need to raise cash.” Link

“Brand new, never used, Doepfer MAQ 16/3 midi Analog sequencer. I bought this new in in July ready for my long awaited move into my new studio next month. It has the Blue LED’s and has been sitting in my house for the last couple of months. I have had to send a couple of synths in for repair along with my RE-201 and i need the money to cover repair costs which have turned out to be more than i anticipated, and sound treatment of the studio so i will have to part with this for now, unfortunately. I hope to buy another one at the end of the year.

I have never used this or connected it to any outboard equipment, i opened the box and powered it up to watch the blue LED’s run and shine, it looks gorgeous, not to bright and easy on the eye. When i opened the box with a pen knife i cut through the manual slightly, its a very neat cut about 3 inches wide and goes through the first couple of pages only, the manual was sitting on top of the unit right underneath the taped up box!” Link

“Doepfer A138 modular mixer. A four input mixer, for the Doepfer modular system.

This is the “b” version, which is primarily intended to mix audio signals (as it is fitted with exponential law potentiometers), but could be used to mix control signals if desired.

It comes with the appropriate Doepfer bus cable, to supply power to the module.” Link

“This auction is for a Doepfer A-141 Voltage Controlled Envelope Generator VCADSR in a Eurorack format module.

This is a very versatile module – great for rhythmic and sonic variations.

It has worked flawlessly for me for the past couple of years and I’m only selling it because I have two and I need the room in the rack for other modules.

Mechanically and electronically in good working order apart from the standard rack rash around the mounting holes.” Link

“Used and in excellent condition. Usual light rack rash, included power cable and mounting screws.” Link

“Doepfer A-131 Exponential VCA – Eurorack synth module
PERFECT CONDITION !! Used very few hours in my smoke-free studio, never been on the road.” Link

“Used and in excellent condition. Usual light rack rash, included power cable and mounting screws. ” Link

“Doepfer A-101-2 Vactrol Low Pass Gate in excellent condition. Warm, natural tones abound here. Inspired by the famous Buchla 292 Quad Low Pass Gate. Functions as a Low Pass Filter, VCA or combined LP Filter/VCA mode. Vactrols have a unique response to CV, in that it reacts quickly to upwards slopes, but lags or “rings” to downslopes, giving the characteristic decay and ringing sound associated with LPGs. Resonance to self oscillation and can be overdriven to a nice warm distortion. Oh, and it secretly make a great kick drum in LP mode with resonance cranked. Just a little rack rash under the screws, but you will never see that when it is mounted. I only have 2.5M rack screws so if you need the more standard 3M, you will have to find them elsewhere, just let me know.” Link

“You are bidding on a Doepfer A-111 VCO 2 High End VCO module in great condition.” Link

“You are bidding on a Doepfer MAQ 16/3. I ordered this about a month back from analogue haven and opened it up, ran through the settings and decided that it is not for me. This is in 100% working condition and is essentially brand new. Control Voltage and Midi output, memory bank and all sorts of settings make this an incredibly versatile and fun machine to play with.” Link

”
This is a Doepfer Regelwerk MIDI controller and analog-style sequencer. It’s in good shape with minimal use. I bought this a few months ago on eBay and it didn’t quite do what I wanted. It’s a powerful tool, although the OS can be a bit buggy at times, sometimes requiring a factory reset. The analog sequencer section is great and an economical alternative since most analog-style sequencers start around $900. This is the older, red LED version. No power supply, but it takes a standard 9V. I might also have a printed copy of the manual – if I find that, I will throw it in.” Link

“Up for auction is an Doepfer A-156 dual quantinizer. The A156 is used to ‘correct’ analog CV signals and fit them into a musical scale. (Various scales can be selected from the switches on the front of the A156.) It is an extremely useful module for creating pleasing melodies on a modular synthesizer. This unit is in excellent cosmetic and functional condition (despite the grainy pic).” Link

“Up for auction is a Doepfer Quantized/stored Random Voltages and Digital Random Voltages modules in excellent condition.” Link

“Here is a very rare and hard to find Doepfer Regelwerk with blue leds. It is in very good shape. I purchased this from audio midi.com but I am downsizing my studio. This unit is guaranteed to not be D.O.A and is fully functional. Great to control any hardware midi or C.V synthesizer or even as a midi controller. The only blemish is in the lower left corner. I recieved it from audiomidi like that. Besides that there is not even a scratch on it. ” Link

“Doepfer standard VCO in new condition. Comes with Plan B expansion board (free). Ships worldwide” Link

“Used and in excellent condition. Hand painted laminate black, nothing pro but feels silky and looks nice when filled up with modules. Bus boards are Doepfer Version 5 with power supply and cord.” Link

“You are bidding on a Doepfer A-110 Standard VCO, excellent working condition. Includes mounting screws.” Link

“Leider hat das letzte mal ein blöder Spaßbieter die Auktion gewonnen.
Deshalb stelle ich diesen Artikel nun nochmal ein.

Sie bieten auf einen

Leerrahmen für das Doepfer-Modularsystem A100

Der Rahmen ist nicht original von Doepfer und hat deshalb keine Abdeckungen.
In Kombination mit einem anderen Rahmen oder anderen 19″ Geräten (Rackeinbau) ist das aber kein Problem.
Abdeckungen kann man auch problemlos nachkaufen
Das Busmodul und die Netzteile sind original von Doepfer.
Zustand:
Technisch 1 A, optisch leichte Gebrauchspuren, der Ramen ist auf einer Seite beschriftet, was man aber im Rack nicht sieht.” Link

“As new apart from the usual marks around the screw holes. Comes with both screws an connector cable. ” Link

“Nice used Doepfer A-140 ADSR envelope generator module.
This module was used very little and works perfect.

Auction includes 1 power cable, and 2 mounting screws.” Link

“Doepfer A143-2 QUAD ADSR Envelope module hardly used and in excellent condition.
4 ADSR Envelopes in one module!” Link

“DOEPFER Basis System 1 in Koffer Case 9U incl. A-190 MIDI/CV/SYNC-Interface (mit 5v adapter), A-112 VC-Sampler und A-188-2 Tapped BBD Module

Folgende Module befinden sich im System :

1x Tapped BBD Module A-188-2
1x MIDI/CV/SYNC-Interface A-190 (mit 5v low cost adapter)
1x VC-Sampler A-112
2x Standard-VCO A-110
1x Ringmodulator A-114
1 x Audio-Divider A-115
1 x VC Waveform-Processor A-116
1 x Noise/Random A-118
1 x VCF1 A-120 (24dB Tiefpass 1)
1 x VCF2 A-121 (12dB Multimode Filter)
1 x linearer VCA A-130
1 x logarithmischer VCA A-131
1 x linearer Mixer A-138a
1 x logarithmischer Mixer A-138b
2x ADSR A-140
2 x LFO A-145
1 x Dual-S&H A-148
1 x Dual VC Switch A-150
1 x Trigger-Teiler A-160
1 x Trigger-Sequencer A-161
1 x Dual-Trigger-Delay A-162
1 x Dual Slew Limiter A-170
1 x Multiple I A-180.
Abmessungen außen: (BxHxT): 460 x 465 x 175
Gewicht Koffer: 8.3kg

Hinweis: Der A-121 wird im Basissystem 1 und 2 ab Januar 2010 durch das A-106-6 XP Filter ersetzt, da Bauteile für das A-121 nicht mehr lieferbar sind.

Geliefert wird das A-100 in einem Koffer mit 9HE, bzw 3 Modulreihen. Nutzbare Tiefe beträgt in Netzteilhöhe ca 80mm, ansonsten 100mm (gerechnet ab Innenseite der Frontplatte).

!!! 3 Jahre Music Store Garantie !!!” Link

“Sie bieten auf das Dopefer-A100-Modul “A124 WASP Filter”. Das Gerät wurde kaum benutzt und befindet sich sowohl optisch als auch technisch in einem einwandfreien Zustand.” Link

“Sie bieten auf ein 19″ Rack, das Module des Doepfer A100 Modularsystems aufnehmen kann. Insgesamt stehen 84TE in der Breite zur Verfügung.” Link

“Doepfer Modular Synthesizer Module A-132-3 DVCA

Great condition. 100% functional. Comes with cable.” Link

” here’s a heavy duty Doepfer bus board with the adapter for larger modules like the midi interface. works
great and has enough power for several modules. 4 of its contacts have solder on them but there are another set if you want to use clean clips.” Link

“This schaltwerk has seen better days to be completely honest.
The ‘on’ button on the 8th row doesn’t work and needs replacing, and there are a few scratches on the front panel (one of them quite large).
Apart from these problems, it still functions fine. Starting the bidding lower than what these usually go for to compensate for this.” Link

”
Zustand:
Technisch 1 A, optisch leichte Gebrauchspuren
Genaue Informationen finden Sie auf der Seite des Herstellers” Link

“Hallo,
Verkaufe hier meinen Doepfer A 156 dual quantizer.
Brauche ihn nicht mehr, da ich mir einen sequencer mit quantizer gekauft habe.
Der a156 ist wie neu – keine einbauspuren. Funktionieren tut er auch tadellos!
Rechnung von schneidersladen ist mit dabei. Restgarantie ist noch vorhanden.” Link

“Like new , get your trigger on. You need your own power supply. ” Link

“DOEPFER MODULAR SYTHESIZER SYSTEM WITH 12 MODULES

$0.99 AUCTION

THE SYSTEM HAS THE FOLLOWING MODULES: A-171 VCSL, A-125 VCP, A-156QNT, 4 A-181, 2- A-138 MIXER, A-115 DIV., A-116 WP, 191 MCV16. SYSTEM IS IN FINE WORKING CONDITION. ” Link