Synthfind

“Classic instrument from the 1980`s and is very popular because of its midi capabilities so you can hook up a sound module and rock the keytar on stage. The unit is fully working and in good condition, the battery cover is missing but a bit of tape will soon solve this.” Link

“Ein.. nein DER Klassiker! Ich denke ich brauche ihn nicht zu beschreiben. In unzähligen Musikproduktionen der 80er war er im wahrsten Sinne des Wortes “Tonangebend” und mit Digitaler Vollsyntese und MIDI den anderen ein großes Stück vorraus.

Zum Zustand:

Er war und ist kein optisches Sammlerstück. Er war mit mir “damals” auch auf der Bühne und hat diverse lacktechnische Gebrauchsspuren und Kratzer. Ist aber niemals gefallen und war bis vor einem halbe Jahr auch immer brav im Case (das Case ist NICHT Bestandteil der Auktion!). Display und alle Bedienelemente sind ok und funktionieren. Die Tastatur ist absolut in Ordnung und spielt sich immer noch gut.

Typischer Mangel: Die Batterie ist leer. Das bedeutet auf dem internen Speicher bleibt nix drauf. Macht aber nichts, denn es ist eine RAM Cartridge dabei. Auf der können selbsterstellte Sound gespeichert werden. Auch gibt es Software im Internet um einen Midi Dump zu erstellen. Ansonsten außer den optischen Mängeln voll funktionsfähig!

Warum ich meinen Schatz verkaufe? Ich habe immer wieder versucht ( auch mit anderem Equipment) wieder Musik zu machen. Aber ohne Band macht es mir einfach keinen Spaß mehr. Und für eine Band fehlt mir die Zeit..

Zum Lieferumfang:

-1x DX 7

-1x DATA RAM Cartridge (org. Yamaha)

-2x VOICE ROM Cartridge (org. Yamaha) mit je 2 Bänken original Sounds

-1x Yamaha Staubschutz für das DX 7

-1x DX7 Bedienungsanleitung im original

Und zusätzlich bei Selbstabholung: 1x Quick Lok Ständer

Am liebsten wäre mir an Selbstabholer (in Pinneberg oder Hamburg Bahrenfeld), da ich das Case schon vor einem halben Jahr abgegeben habe. Aber Versand biete ich auch an und werde ihn dann gewissenhaft im festen Karton verpacken!

So. Nun viel Glück beim bieten.

Ach ja: Dieses ist eine Auktion von Privat an Privat ohne Garantie, Gewährleistung und Rückgabe! Wem das nicht gefällt, der möge bitte nicht mitbieten.

Bei Fragen: Einfach fragen!!” Link

“Verkauft wird ein YAMAHA CS-5 Analogsynthesizer. Baujahr ca. 1978 / Anfang 80er. Der CS-5 war seinerseit Yamahas Antwort auf den MS-10. Im Gegensatz zum MS-10 ist der CS-5 nicht halbmodular, hat aber auch CV/Gate-Eingänge, so dass er mit einem MIDI-to-CV/Gate-Adapter auch per Midi spielbar ist (Yamaha verwendet den Roland-CV/Gate-Standard, wie ihn auch Doepfer und andere aktuelle Hersteller verwenden… Der Synth ist also mit neueren CV/Gate-Instrumenten kombinierbar!). Zudem gibt es einen Signaleingang, um externes Audiomaterial mit dem Filter bearbeiten zu können! Der Synthie ist technisch voll in Ordnung und auch optisch seinem Alter entsprechend gut in Schuss. Er stand länger ungenutzt rumm und müsste mal wieder gestimmt werden. Detailiertere Infos über den YAMAHA CS-5 sind über Youtube und Google zu finden.” Link

“Schweren Herzens versteigere ich aus meiner Privatsammlung, einen seltenen

Analog Synthesizer Yamaha CS-15 mit 37 Tasten ! ! !

er hat auser LFO noch 2 x VCO, 2 x VCF, 2 x VCA, 2 x ADSR,

2 x Mixer, Portamento, Brilliance,

extern Audio In, 2 x CV / Gate Eingang

sowie eine Kopfhörerbuchse vorne am Gerät ! ! !

Kostenloser Versand bei sofort kauf !!!!

er ist in sehr gepflegtem Sammlerzustand und dadurch auch jeden Euro Wert,

da ja wie jeder weis, die alten Schätzchen mittlerweile richtig gesammelt werden.

Das Instrument macht richtig viel Freude und lädt zum Soundschrauben ein ! ! !” Link

“You’re bidding on a Yamaha SHS-10, AKA a “Keytar.” If you’ve been looking to pick up one of these units, this is the auction for you. This item is used but in wonderful shape. It’s been carefully stored in a smoke-free home. The package includes:

* The unit itself, in perfect working order and near-perfect cosmetic condition (please see the many close-ups accompanying this post)
* The original strap, with classic “YAMAHA” lettering
* The original manual – not a photocopy or reproduction
* A working power supply (Not the original, but the correct voltage and plug size for the instrument)
* The original box

The box has seen better days, but everything else in this package is in truly great shape.” Link

“This keytar is in great working condition. It looks good with some minor scratches from being moved around. There are no straps or cords with it and the batterie cover is missing” Link

“HERE WE HAVE A GOOD CONDITION YAMAHA DX7
THE KEYBOARD WORKS FINE SORRY NO MANUAL COSMETIC CONDITION IS 7.5 OUT OF 10 ‘ Link

“Up for auction is an Excellent condition Yamaha DX-7 Vintage Synthesizer. It works perfectly, plays great. Its looks are excellent, no significant dings or scratches. Really this ones about as mint as you can find.

Includes:

-Excellent condition Hardcase,

-Foot pedal

-2 Rom Cartridges

-The Complete Dx-7 Book

-Original Brochure!” Link

“Here for auction is a YAMAHA DX21 for parts only. SOLD AS-IS . Couple of keys missing. Will not produce any sound , but i think its because the battery when out and sound has to be reloaded. Has seen better days, Any questions feel free to ask.” Link

“This TX rack is in excellent condition both functionally and cosmetically. It has been lightly used in a clean environment, and functions perfectly. The rack has 4 TF1 modules installed, and the remaining 4 spaces have both front and back cover plates. The sound quality is superb. Yamaha used higher quality components in these racks, and the result is a noticeably fuller and richer sound quality when compared to a DX7. Each TF1 has a balanced XLR output connection. This includes the user guide, manual, service manual, and four XLR to mono 1/4 cables. I recommend downloading DX7 Librarian, as organizing and editing your sounds for each model is greatly simplified. Also, with a software like that, programming is possible without a DX7. Setting two modules at the same sound preset and de-tuning them makes the DX7 sound massively wide and fat.” Link

“The SK- 20 is an all analog polyphonic synth that has organ, string, and synth sections. These three can be blended together via a built in mixer section. Sound is fat and warm from all sections. The synth’s filter is very musical and deep. The envelope generator for the filter is very shape-able. This synth is tough as nails and would be great for a touring band, given that it is not in museum-piece shape. However, electronically the synth is in very good condition. It does also have all knobs and sliders, and they are all noise-free. It is missing the two highest black keys. The electronic contacts for those work, so they just need keys, which are easily found online. Please bid with confidence, as I have described this well built synth accurately. It should serve someone well for years to come. It will be well packed and shipped promptly.” Link

“I am selling a Sequential Circuits Multitrak. I have replaced the battery and also did the battery drain fix modification so that the new battery will last 7 years instead of 3 months, you can see the picture of the battery mod i did. It is a common problem on most multitrak’s the battery drains in less than 3 months. The link for the battery mod is http://www.k5000.org/gear/MultiTrak_battery.html. I also got a brand new custom made power supply built for the multitrak. These power supplies are not made anymore, they are rare and hard to find and to get a brand new one made would cost at least $200. I had mine built from a professional technician. The physical condition is pretty much perfect, with no major scratches or marks on it as you can see from the pictures. Everything functions as it should. There are no presets on it, but the battery does work so you could load all the presets if you wanted to.” Link

“Sequential circuit Tom for sell
- In perfect working condition and state.
-With manual and midi manual (copies) ,
– 3 of the 4 cartridges: basic percussion(7 sounds)
special effects(7 sounds)
contemporary(7 sounds)
missing latin percussion
and of course the initial 8 sounds.

Original adapter (220v) with a bit of tape on the plug.
You can get extra memories from winecountry,
they are really helpfull to provide info and still work on spare parts,
20dollar for 2500 events, initially there are 2500 events
installed in the Tom, expandable to 10 000(3 slots free).
An other option is to upload/download via tape.’ Link

“the myth!! made in the US early 80s, this is the doublemanual model – the synth is fully functional as apart from some discoloration on the wooden sides, everything else is as it should be, that is, everything on the hardware is the original. there is plenty of information on the web. ” Link

“This auction is for a classic Sequential Circuits ProOne monosynth,in need of repair.
I bought it with the intention of repairing it myself ,but never got around to it.
Firstly it is repairable,and would make a good project for someone looking for this classic.
Or for someone looking for a wealth of spare
parts at a good price.
The main problems are:
1)The main power switch is gone ,and the printed circuit area where is was removed is damaged,(see photo)
2)The J-wire key board is not connected to the motherboard,and the connector block on the board has been removed.Also not sure if the keyboard works properly if connected ,but it might.
The main positive points are:
1)All main components ,IC’s,etc. have been checked by a qualified tec.,and are working,

2)Current flow through the motherboard has been checked and is consistent,so the mother board is functional.
3)All knobs,keys ,J-wires,switches,mod wheels,are intact and present.
So it is repairable.Im am selling it with no power plug connected.
Even if only purchased for hard-to-find spare parts you would save alot of cash .” Link

“This listing is for The synthesizer powers up but no sound comes from the keyboard. Having never tested a synthesizer before, we are unsure if we need some kind of output to make it work. Therefore, we are selling it as is. It is otherwise in good condition. It is missing the button for the “1″ under “Select”.” Link

“The most classic synthesizer of the eighties! It is capable of a delightful analog sound unique to Sequential’s Prophet series in which the P5 was King! Five voice polyphony – two oscillators per voice and a white noise generator. The analog filters, envelope and LFO all sound great and are extremely flexible. Still loved today for its great string sounds, analog effects, and punchy analog basses.

I am the original owner. This unit was purchased in late 1982 and has been in a smokefree home in its anvil case unplayed since 1983.

Included in this auction:

The Prophet-5 keyboard.

Serial number is 4047. It is one of the last Rev 3.2 Prophets made. It had the 120 patch storage capacity installed at the factory. This makes it effectively a Rev 3.3.

Rev 3.3 is the final version and is capable of microtonal tuning and MIDI retrofit. This Prophet does not have MIDI.

The original factory programs tape, dated January 1982. It contains 120 programs in 3 files. This keyboard will be shipped with these files loaded into it.

A CD, containing a bit-for-bit perfect digital copy of the files on the January 1982 factory programs tape, in two formats: WAV and MP3. These files can be “played” into the keyboard’s cassette interface just like a tape. Also included on this CD are 3 banks containing a total of 88 unique programs from my old backup tapes, and 2 containing “Mixed presets” (The last two were found on the web, search for SYXWAV.) These files are also provided in WAV and MP3 format.

The original manual, dated January 1982. A PDF copy of the February, 1982 manual, which describes the firmware enhancements added to units with 120-program memory, will be provided on the CD.

An ATA-approved expensive Anvil flight case, custom-built for the Prophet-5.

The following maintenance was just completed:

# New key bushings were installed.
# Key contacts and bus bar were cleaned with Deoxit.
# Keys were leveled.
# 10uf tantalum capacitors were replaced with electrolytics: three on board 3, two on board 4, and two on board 5. (Board 5 is the power supply)
# The three 2.2uf tantalums on board 5 were replaced with electrolytics. All of the capacitors in this keyboard’s power supply are now electrolytics.
# A new battery was installed.
# 1/4 inch jacks on the rear panel were cleaned with Deoxit.

Defects:

1. If you look down into the gap between the high C key cap and the wooden case you can see that part of the high C key is missing. As you can see from the pictures you have to be looking down into the gap for it to really be visible. The high C key still plays equally as well as the other keys.

2. Some of the potentiometers feel as if the lubricant has dried up. They require a bit more effort to make them turn initially. This only affects the feel though, all of the potentiometers, switches, and LEDs in this keyboard are fully functional, and this keyboard is ready to be played now.

3. There are some scratches on the bottom of the metal chassis, typical of a keyboard that was played live a few times.

Remember, this keyboard has seen very little actual use. I stopped playing live music in 1983 to focus on running my mobile DJ business. This keyboard has been in it’s case almost the entire time since then! You won’t find many examples of a synthesizer of this age where all of the internal parts are in “like new” condition. Don’t miss your opportunity to own this legendary vintage synth!” Link

“Up for auction is a used Prophet 5 rev. 3 synth with a copy of the Operation Manual and the power cable.
Item is in Excellent + – Near mint physical condition w/ very minor scuffs on some of the wood.
The unit was gone through and cleaned internally recently by Advanced Musical
Electronics (in L.A.). Advanced also restored all 120 factory memory presets.
The unit has been covered in a smoke free studio environment and used periodically
(but never gigged with)since being serviced. All functionality works as it should and is stable and reliable. ” Link

“For sale is a rare and vintage Sequential Circuits Prophet 5 Rev 3.3 five voice analog synthesizer with midi installed and 120 programs. Recently serviced, works perfectly, never gigged with and kept in smoke free home studio and is in gorgeous condition, near mint with very few and very minor cosmetic flaws. The wood looks incredible on this one. Don’t miss out on this classic synth and centerpiece for any studio! A manual will be included along with power cable.” Link

“We don’t get to see too many vintage synths these days but this is in great condition! Fully tested, we confidently provide a 3 month parts & labour warranty on this great investment. Shipping to mainland UK will be via DHL using their ‘Next Day’ delivery service…

The ARP Axxe was a monophonic analog synthesizer created by ARP in 1975 as a cheaper, scaled-down version of the legendary Odyssey. It has a single VCO producing two different waveforms that is passed through a basic low-pass filter and VCA. Modulation can be applied to almost every section of the synthesizer. Noteworthy was the addition of sample-and-hold and the ability to pass external audio through the filter (in the tradition of the Minimoog). ” Link

“HERE IT IS AGAIN! DONT MISS IT! This is an ARP Omni 1 in EXCELLENT CONDITION . All slider/pots have been cleaned and are working perfectly, 2 notes seem to be bleeding, 1 note does not work at all (but it looks like a very simple fix), and the LFO slider knob has been broken but you can still use and it works fine. This Synth is in great shape for its age and SOUNDS AMAZING! I am also including a box of parts that should cover the needed repairs.” Link

“This unit was sitting up in a church for a long time. It has cosmetic imperfections, but structurally it is solid, and it sounds Great. All the function sliders work properly, except for the Volume slider. (it has no affect on the sound). All of the sound production buttons work properly as well, they bring in the Viola, Violin, Trumpet, etc, as they should. The rotary Pitch adjustment knob works perfectly. All of the keys work properly, except for the 25th up from the bottom left. It plays the string sound ok, but does not play the low fundamental sound like the other keys. The Bass section plays the Bass notes properly and the buttons work fine. The modulation sounds fabulous, and as I understand it, this is one of the reasons why this Unit was used on so many Hit records. As the pictures show, some of the Keys are not at the same level as the others. I would guess there is probably a way to correct this, though as I said, they all play fine. Also, there is surface discoloration and slight rusting on the front panel, though most of the control writing can still be made out. The on-off light does comes on, but it is very dim. Also as far as cosmetics, apparently at some time in the past, the veneer covering the edges of left side, end piece, came off on the bottom sides, and someone put duct tape around them. I have posted many pictures to try and show all major areas. As far as the output, it is accessed at the “expression pedal” output. The “gate outputs” work properly as far as I can tell. I am not a keyboard player, but I will try to answer any questions I may have left out.” Link

“We have a an ARP 1613 Sequencer for sale!

This unit works well and as intended.
Circuitry and construction are original to the unit.
Jacks and controls operate properly.
The red fader tip for the “Clock Freq” control and one rubber foot are missing.
The unit shows some cosmetic scratching and wear from age and use, but is sturdy overall.
The faders and buttons operate well, but could use cleaning/lubrication before going into heavy usage.
Unit is guaranteed to be working on arrival.

In a world where analog-style sequencers have come en vogue again, one unit stands alone.
The ARP Sequencer is the standard by which all others are judged.
Get it into your studio and let the diabolical experimentation begin.
Do it now.” Link

“Here we have a very fine ARP Pro Soloist synthesizer from the 70′s. It is in very good condition for it’s age. Serial# 27-2960. All the function’s work perfectly and it sounds incredible! Some of the moving part’s, switch’s, and fader’s are slightly dirty so my keyboard technicinan is going thru the complete insides and cleaning and checking everything. Don’t ask me why the wooden side’s are missing. There is 1 fader knob missing as you can see.” Link

“ARP Odyssey MK3 Analog Synthesizer

Model 2823 Black and orange low serial number (28230219)

Very good overall condition, 100% functional. No surface scratches, emaculate face. Leather sides in very good condition as seen in photographs. Back in very good condition, no scratches. All four bottom rubber feet in very good condition. All keys line up and are in very good condition. Clean unit. New power cord.

Additional accessories include original ARP foot switch, and original ARP/Dunlop expression pedal with cord. Both pedals are in very good condition and fully functional. Also included are ARP Odyssey manual, ARP Odyssey patch book, and ARP Odyssey service manual. Bonus items are NEW XL ARP Odyssey t-shirt and black and orange ARP Odyssey case sticker.” Link

“ARP Odyssey Vintage Synth. This unit is NOT WORKING and is offered as a rebuildable project. I lights up but has no audio out. Service manual is available online. I don’t have time to rebuild it so I’m letting it go. Copy of owners manual included.” Link

“Thanks for visiting my auction. Today I have a vintage Arp Omni from I believe 1975. I’ve gotten about 85% of the way resurrecting this girl and have lost interest. Its been recapped ( all Arp Omni keyboards need this to function) and other ICs replaced to get to this point. The only issue now are the last 3 sliders in the synth ADSR section need to be replaced. All the keys work and sound. Like I said; it is almost there and could definitely be used as is….. Fat, luscious, phasin’ quirky strings– nothing sounds like it.” Link

“Great analog vintage synth.

It switches on, but I’m not sure it’s fully working as at this time I have no way to test it. Therefore the item is sold as is.

NO RESERVE

Good luck!” Link

“AKAI AX 60

Very good condition

Everything works as it should

Master Volume and level split balance sliders missing

and replaced with Arp slider caps (top left corner)

Some scratches around, no dents no missing screws

Sliders has been cleaned and lubricated and work easy…

Soft carring bag included

This synth was stored in the carring bag all the time in smoke free studio

110V machine

No manual ” Link

“Selling a now hard to find analogue Polysynth. The Kawai SX 240 was only made in a couple of thousand hence its rarity now, its a 61 -note 8-voice 16-DCO,48 memory MIDI Polysynth made between 1984-85.There is also a 1500-note real time sequencer on board as well,among the earliest MIDI synths made.In good working order ,one or two buttons require a 2nd press , a clean of the contacts will cure this, well made ,was made in Japan, in Hammamatsu i believe, where the mighty Yamaha CS80 was made.In good condition for age and a download manual is available on the web, great for classic analogue electronic sounds, the Brass and Strings are very good.Please note this synth is pick up only ,the synth is about 14kg ,i dont have a box suitable for shipping.X stand NOT included in sale” Link

“Up for bids is an E-Mu Emax II 16-Bit Digital Sound System. This model is 2201. This item is in perfect operational condition and looks excellent. This item is nearly mint and I have seen few vintage keyboards in such excellent condition. The backlight is extremely bright and not at all burnt out. The operating system is 2.14. Included with the keyboard are an OS 2.14 boot disk, the original power cable, the original manual, two MIDI cables, two 1/4″ audio cables, and a padded gig bag. The serial number is 0500641.” Link

“I sell my vintage E-MU SP1200 8bit Sampler / Sequencer /Drummachine.

If you’re watching this as you probably know this instrument and know how crunchy, powerful and deep it sounds alike.

The cosmetic conditions are pretty good: it is used but kept very well, with minor signs here and there but nothing big nor signs of abuse.
The LCD is still bright and will last for years to come; the white switches and the pad buttons have been cleaned by myself and I think I
did a good job as they can get very sticky months after months and may compromise the proper use of the item. I cleaned each pad button
from the inside removing them off and cleaning both the inner surface and the small spring which control the velocity of each assigned
instrument. I can’t say they perform like new, but they are smooth enough to be used without that annoying “double trigger” effect so typical
in used SP1200s.

The 8 sliders work perfectly, without noises or hums, and so do the audio outputs..!
Last but not least, the internal floppy drive has been replaced an year ago and it’s been used a few times since then, and it’s nearly new.

The SP comes with the Operating System floppy disc and works @ EU 220v voltage.” Link

“A RARE VINTAGE SOVIET-MADE WAVETABLE/ANALOGSYNTH MAESTRO. GOOD WORKING CONDITION, TUNED TO SPECS. IT WAS MANUFACTURED IN 1980′S BY ‘FORMANTA’, A SOVIET MILITARY RADIO PLANT AT KACHKANAR, NEAR SVERDLOVSK. THE SAME ONE WHICH MANUFACTURED NOW LEGENDARY POLYVOX SYNTHS. ” Link

“you’re looking at a Studio Electronics SE-1 analog synth, thins thing is awesome and I’m only selling it because I got a vintage minimoog and now I have to pay for it(hate that part) – otherwise I would totally keep it. This synth is in great condition, there’s a couple scratches from coming in and out of racks but it’s cosmetically in great shape compared to other SE-1s I’ve seen. It’s 100% functional and I used it in a few recordings, totally reliable and sounds amazing. The release knob of the filter envelope is a little bit loose but you can barely notice it, I’m just mentioning it here to avoid surprises even tho I believe most people wouldn’t notice it all – I try to describe my items as accurately and honestly as possible.” Link

“Nice used STG Soundlabs Graphic Sequencer module.

This has been used very little, and works perfect.

Includes ribbon power connector, and mounting screws, and extra connector wire for connecting to other STG sequencing modules.

Has normal screw hole marks.” Link

“Nice used Flame Tame Machine module.

It’s a combination of a quantizer and a beat looper. This has been used very little, and works perfect.

Includes ribbon power connector, and mounting screws, and the original box.

Has normal screw hole marks.” Link

“Nord Micro Modular synth in great shape. Only a couple scratches. This thing is an amazing studio tool, you can create just about any synth you can imagine. Has 2 inputs for processing sound as well” Link

“MACBETH – X-SERIES – “BACK-END” – ALL TRANSISTOR LADDER FILTER, ALL TRANSISTOR VCA AND DUAL ALL TRANSISTOR ENVELOPE GENERATORS — IN EXCELLENT TO NEW CONDITION!! One of the best filters and VCA I have ever heard. The all analog EGs are snappy as can be!! ” Link

“DOEPFER A-106-1 – Xtreme Filter LP/HP – In Excellent Condition!! Based on the MS-20 Filter with lots of extra controls and CV inputs!! — Selling due to the fact that I need the money.” Link

“The module is in good condition and comes with a Doepfer power cable, mounting screws, and a downloaded copy of the manual, but I should point out some of the limitations I have found while using it: The range of pitch control is very short – forget playing it from your 4 octave keyboard – and most waves are really only useful for melodic playing in the lower octaves. This is not a problem if you are using a sequencer rather than a keyboard to control the pitch. The resolution of the knobs is not adequate to prevent drifting between waveforms. To avoid this they must be controlled via the cv input. There is no drifting if using a constant voltage source such as Doepfer A-176. And controlling the wavetable with a varying voltage such as an LFO is fine, and predictable. This can produce some very interesting and unique sounds, especially with a sequencer controlling both wavetable and pitch. To sum up – this is a module for producing some unusual sounds, but is not a replacement for an oscillator.” Link

“PAIA 4700 modular synth for sale. Some modules are working fine but some needs work. So I am selling this synth AS IS. But here is what I know of the functions and the conditions of these modules: VCO 4720 x 3 (one needs work); Envelope Generator x 2 (one may need work), Control Oscillator x 1 (this seems to be from the older PAIA system; noise section needs work), 4730 VCF x 1 (needs work), Spring Reverb 4712 x 1, Mixer 4/2, Balanced Modulator x 2 (one may need work), Sequencer. Power Block 4770 x 2 (these are not being used and they are upgraded with much better toroidal core transformer and JLM AC/DC ver. 2 power supply from JLM Audio for cleaner juice. Also power cable between two panels are replaced with DIN 5pin connector for safety.) I have played one panel on left in the picture frequently but didn’t have time to restored the other panel together. I am selling only because I have too many projects. Over all, this is a very good system, if you know how to work on electronics and enjoy the project.” Link

“You are bidding on a MOTM-190 µVCA, assembled & tested. This module is part of my large MOTM system (see photos) that I am stripping down in order to sell individual modules. This is one of the first that I will be removing from the whole system and selling. If you have any questions about the system or the modules, just email me.

This module was constructed by me approximately 6 years ago. The photographs below the image of the MOTM-190 show another module constructed at the same time, as an example. As you can see from the photographs, I have not cut any corners and have paid great attention to detail. All the ICs are mounted using gold-plated IC sockets. The PCB was constructed using organic-core solder which resulted in a very clean appearance. All wires are bundled and components are aligned consistently for ease of modification or future troubleshooting.” Link

“You are bidding on a MOTM-830 Dual-Mode Mixer, assembled & tested. This module is part of my large MOTM system (see photos) that I am stripping down in order to sell individual modules. This is one of the first that I will be removing from the whole system and selling. If you have any questions about the system or the modules, just email me.

This module was constructed by me approximately 6 years ago. The photographs below the image of the MOTM-830 show another module constructed at the same time, as an example. As you can see from the photographs, I have not cut any corners and have paid great attention to detail. All the ICs are mounted using gold-plated IC sockets. The PCB was constructed using organic-core solder which resulted in a very clean appearance. All wires are bundled and components are aligned consistently for ease of modification or future troubleshooting.” Link

“You are bidding on a used, but well cared for Analogue solutions modular synth case. Includes the power adaptor and I will throw in a bag of small screws. Extra holes have been put into the rack. Power several modules with this nice compact case!” Link

“For sale a MK1 Nord Modular rack synth.

The synth is in good condition and full working order.

Version 3.03 software.

Comes with the rack ears, cables plus cd with user manual, 1000′s patches and PC/MAC software editor. “ Link

“For sale is a rare and vintage Emu Sp 1200 sampling drum machine. This drum machine is a classic and used on many famous recordings, great lo fi sampling. Fully functional and is in excellent cosmetic condition, a few scruffs and a little padding attached to the bottom surface, but minimal face wear and overall looks very nice. Comes with a couple of disks, one of which will have OS 1.2. Also includes photocopy of manual and power cord.” Link

“Von diesem MOOG trenne ich mich besonders ungern. Aber ich habe einen zweiten und ich brauche Platz.

Dieser Polymoog ist optisch in Zustand 2. Es gibt einige wenige Kratzer und er könnte mal ein Wischtuch gebrauchen.

Technisch hat er zur Zeit Probleme mit den Tastenkontakten. Es gibt teilweise Doppeltrigger und Nebengeräusche. Ich wollte die Tastenkontakte immer mal reinigen. Aber ich habe nie die Zeit dazu gefunden.

Ansonsten sind die Funktionen alle gegeben. Die Tastatur spielt sich hervorragend und ist nicht ausgeleiert.

Diesen Moog möchte ich eigentlich nicht versenden. Weil ich aber aus eigener Erfahrung weiß, dass man manchmal trotzdem bieten möchte, auch wenn man weiter weg wohnt, kann ich ihn sehr sicher verpacken und mit einem Sonderversand auf den Weg schicken. Die Kosten schätze ich auf 50-80 Euro. Aber ihr könnt gerne einen Versand vorschlagen bzw. organisieren.

Ich kann auch anbieten, den Synthesizer nach Bonn, Aachen, Düsseldorf oder Frankfurt a.M. zu liefern, wenn wir einen Termin vereinbaren.

Das Case gehört übrigens nicht zur Auktion. Das möchte ich gerne für meinen verbleibenden Polymoog behalten.

Noch ein paar Infos zum Polymoog findet ihr auf unserer Website. Einfach mal unter „Tastronauten“ googeln. Dann im Menü „Tasten“ anklicken und links den „Polymoog“ Button auswählen.

Viel Spaß beim Bieten und vor allem beim Spielen.” Link

“Zur Auktion steht ein Moog Minimoog Model D mit der Seriennummer 4928.

Der Minimoog hat volle Funktion.

Die Tastenkontakte müssten gereinigt werden. Evtl. müssen auch die Gummis unter den Tasten erneuert werden. Die Tasten funktionieren trotzdem.

Der OSCILLATOR-3 Volume Poti rauscht nur beim drehen, sonst nicht.

Der MAIN OUTPUT Schalter funktioniert tadellos trotz leichten Wackelkontakt.

Die restlichen Bedienelemente funktionieren einwandfrei.

Leider besitze ich kein Fachwissen für dieses Gerät. Ich habe es von meinem Onkel geerbt. Es steht bei mir nur rum und soll nun einen neuen Besitzer bekommen. Eine Generalüberholung durch einen Fachmann könnte das Gerät sicherlich wieder auf einen TOP-Zustand bringen. Ich denke es gibt aber hier genug Fachleute die sich mit diesem Moog gut auskennen und solches selber ausführen können.

Überzeugen sie sich ebenfalls über den Zustand des Gerätes anhand der Originalfotos.

Bei Fragen einfach über ebay mailen.” Link

“REALISTIC MOOG CONCERTMATE MG-1 SYNTHESIZER

THIS IS THE ONE YOU WANT! EVERYTHING WORKS!
ALL COMPLETE! NO DAMAGE!

I purchased this brand new from a Radio Shack in 1983. It was for my wife. It has had less than five hours of use since then. It has been wrapped in a sheet and shirt and stored in a suitcase in a cool dry area of our home for most of the last 27 years. The original manual is included. The original box is not. I thoroughly tested every key, slider, knob and function. Everything works perfectly.

Description:
Realistic Synthesizer by Moog Music Concertmate MG-1
Model 42-4000
Serial No. 6114″ Link

“I’m only selling this because I’m about to be doing some travel and need to raise funds for that. This MG-1 works great, I’ve never had any issues with it, some of the plastic caps are missing from the sliders but it doesn’t effect the performance of this amazing synth at all. Also one of the keys has a chip underneath it, again nothing that hinders its performance but I wanted to mention it, so the buyer wasn’t in for any surprises other than the incredible sounds of this synth. This synth is very interesting because just the slight move of one toggle switch or slider can alter the sound completely. ” Link